Error codes · Samsung
Samsung Washer Error Codes
Samsung changed its washer codes over the years, so the same problem can show as 4E on an older model and 4C on a newer one. Here is what the common codes mean, with both versions, and what you can try first.
- 12codes explained
- Checkedagainst Samsung sources
- From $59if you need us
How to read Samsung washer codes
Codes ending in C are the newer form of the older E codes: 4C and 4E both mean a water supply problem, 5C and 5E both mean a drain problem. On some models dC is a door error, on others it is an unbalanced load, so check your manual if unsure.
Code list
Water in and out
Water supply problem: not filling.
What to do: Open both taps fully, check hoses are on the correct hot and cold inlets and not kinked, clean the inlet filters, then power off for a minute and retry.
Drain problem.
What to do: Check the drain hose for kinks and blockages; on front-loaders, drain the water through the small emergency hose and clean the pump filter.
Overflow: too much water in the tub, sometimes from too much detergent.
What to do: Power off a minute and back on so the pump drains. If it returns, the water level sensor or valve needs service.
Water level or leak problem.
What to do: Look for leaks and kinked hoses; run an empty rinse without detergent. If it continues, call.
Too many suds. The washer pauses to let them settle.
What to do: Use the right amount of HE detergent. No service needed.
Door, balance and motor
Door not detected as closed and locked.
What to do: Make sure nothing is caught in the door and it latches. If it continues, the lock or latch needs service.
Unbalanced load (on some models dC means door error).
What to do: Redistribute the load; add two or three towels to a very small load.
Add Door not locked (AddWash models).
What to do: Close the small add door firmly.
Motor error.
What to do: Power off for a few minutes and restart. If it returns, service.
Heater or water temperature problem.
What to do: Check the hoses are on the right supplies. If it persists, the heater circuit needs service.
Temperature sensor error.
What to do: Power off a few minutes and restart. If it returns, service.
Supply voltage problem.
What to do: Plug directly into its own outlet, no extension cord.
Before you call
What you can safely try
- Open both water taps fully and check the hoses.
- Clean the pump filter on front-loaders.
- Redistribute or add to the load.
- Power off for a minute or two and retry.
- Never use an extension cord.
Turn off power before you touch anything inside the washer. If a step needs tools or panels removed, leave it to a technician.
When to call
When it is time for a technician
- 5C with a clean filter and clear hose.
- 3C or HC that returns after a reset.
- Leaking water on the floor.
- Door will not unlock with water in the drum.
A code tells you where to look, not which part failed. We confirm the cause with tests and readings before we quote. Diagnostic from $59, credited toward the repair. Washer repair · Samsung repair
Denver note
What we see in the Denver area
Many Denver condos and townhomes have Samsung washers in closets with tight drain standpipes. If 5C appears after a move or remodel, check that the drain hose is not pushed too far into the standpipe and is not kinked behind the machine.
Sources
Where this information comes from
Code meanings are checked against Samsung's own published support material and written here in plain language. Models differ, so your owner's manual has the final word.
Pricing
What it costs to get started
One diagnostic fee, credited toward the repair. The full price in writing before any work starts.
Repair prices depend on the part and the labor, so we quote after the diagnosis instead of guessing on the phone. If a repair is not worth it, we will tell you.
Diagnostic visit
from $59
Credited toward the repair
FAQ
Questions we hear
Call (719) 745-8080 with anything not covered here.
What is the difference between 4C and 4E on a Samsung washer?
Nothing. 4E is the older form of the same water supply code.
Can I open a Samsung washer with water inside?
Drain it first through the emergency hose by the pump filter. Forcing the door can break the lock and flood the floor.
Related