Skip to content
(719) 745-8080

Error codes · LG

LG Washer Error Codes

LG washers use short two-letter codes. Most of them are about water in (IE), water out (OE), balance (UE) or the door (dE), and you can often clear them yourself. A few point to the motor or sensors and need a technician.

  • 17codes explained
  • Checkedagainst LG sources
  • From $59if you need us

How to read LG washer codes

The code shows on the display and the washer pauses. Fix the cause, then press Start/Pause. If a code clears and stays gone, you are fine. If it returns, write it down and call.

Code list

Water and drain

IE

Not enough water coming in.

What to do: Open the faucets fully, straighten the hoses, clean the inlet screens. If pressure is low at other taps too, it is a plumbing issue.

OE

Water cannot drain.

What to do: Check and straighten the drain hose; on front-loaders, clean the drain pump filter behind the small door at the bottom front.

FE

Too much water (overfill), top-load.

What to do: Unplug, reconnect and restart. If it returns, the pressure sensor or valve needs service.

PE

Water level (pressure) sensor error.

What to do: Unplug for 5 minutes. If it returns, service.

FF

Washer is frozen.

What to do: Thaw hoses and drum with warm water and warm towels before running again.

SUD

Too many suds.

What to do: Use less HE detergent.

Balance, door and motor

UE / uE

Unbalanced load.

What to do: Redistribute the load; add a couple of similar items to a very small load; wash blankets one at a time.

dE / dL

Door or lid not closed or not locking.

What to do: Close it firmly and remove anything caught in it. If it continues, the lock needs service.

LE / AE / LE1

Motor locked or overloaded (front-load); on top-loaders, something may be caught between the washplate and drum.

What to do: Let it rest 30 minutes and restart. On top-loaders, look for a coin or object under the washplate.

CE

Motor over-current.

What to do: Unplug 10 seconds and retry. If it persists, close the tap, unplug and call.

tE

Temperature sensor error.

What to do: Unplug and let the water cool. If it persists, service.

vS / uS

Vibration sensor (top-load).

What to do: Restart; if it persists, service.

E3

Drain motor error (top-load), can follow freezing.

What to do: Thaw if frozen; otherwise service.

Not a fault

CL

Child or control lock is on.

What to do: Hold the lock button(s) 3 seconds.

Cd

Cool down after a dry cycle.

What to do: Remove the clothes or press Start/Pause.

PF

Power failure.

What to do: Restart the cycle.

tCL

Tub clean reminder.

What to do: Run the Tub Clean cycle.

Before you call

What you can safely try

  • Clean the drain pump filter (front-loaders).
  • Check both water faucets and hoses.
  • Redistribute the load.
  • Unplug for five minutes for sensor codes.
  • Use the right amount of HE detergent.

Turn off power before you touch anything inside the washer. If a step needs tools or panels removed, leave it to a technician.

When to call

When it is time for a technician

  • OE with a clean filter and straight hose (likely the drain pump).
  • LE or CE that returns.
  • dE with the door clearly closed.
  • Loud banging or grinding in spin.

A code tells you where to look, not which part failed. We confirm the cause with tests and readings before we quote. Diagnostic from $59, credited toward the repair. Washer repair · LG repair

Denver note

What we see in the Denver area

LG washers in Denver garages and unheated laundry rooms can freeze in a cold snap. FF, IE and OE codes on a January morning usually mean ice in a hose. Thaw first, then run a test cycle.

Sources

Where this information comes from

Code meanings are checked against LG's own published support material and written here in plain language. Models differ, so your owner's manual has the final word.

Pricing

What it costs to get started

One diagnostic fee, credited toward the repair. The full price in writing before any work starts.

Repair prices depend on the part and the labor, so we quote after the diagnosis instead of guessing on the phone. If a repair is not worth it, we will tell you.

How we price repairs · Warranty

Diagnostic visit

from $59

Credited toward the repair

FAQ

Questions we hear

Call (719) 745-8080 with anything not covered here.

How do I fix OE on an LG washer?

Clean the drain pump filter, check the drain hose for kinks and make sure the hose is not pushed too far into the standpipe. If the code returns, the drain pump is likely failing.

Why does my LG washer show UE all the time?

Usually small or single heavy loads. If balanced loads still show UE and the washer bangs, the shock absorbers or suspension may be worn.

Related

Related services and guides

Call now