Error codes · LG
LG Refrigerator Error Codes
LG refrigerators report problems as two-letter codes, usually shown as "Er" plus the code (Er FF, Er dH, Er IF). Most point to a fan, a sensor or the defrost system. Here is what they mean and what to try before you call.
- 19codes explained
- Checkedagainst LG sources
- From $59if you need us
How to read LG refrigerator codes
On models with a digital panel, the code shows in place of the temperature. LG notes that many models can be made to show a stored code by pressing and holding the freezer temperature and Express Freeze buttons together for a few seconds. LG's general advice for any code is to unplug for about five minutes, plug back in and see if it clears; if it does not, or if it returns, the refrigerator needs service.
Code list
Fans
Freezer fan fault. A blocked or stalled fan makes the compressor work harder.
What to do: Usually ice around the fan. Needs a defrost and a check of why ice formed.
Refrigerator fan fault.
What to do: Same idea as FF, on the refrigerator side.
Condenser fan fault.
What to do: The fan near the compressor is not running. Check that nothing blocks the back of the unit; then call.
Ice maker fan problem.
What to do: Often ice around the ice maker fan. Affects ice production.
Defrost
Defrost did not warm the evaporator as expected; the evaporator may be iced over.
What to do: LG's temporary step: empty the refrigerator, put towels down, unplug and leave the doors open at least 12 hours. If the code returns, a defrost heater, fuse, sensor or drain issue needs repair.
Defrost sensor fault.
What to do: The evaporator may ice up. Needs service.
Sensors
Freezer temperature sensor fault.
What to do: The refrigerator keeps running but performance can drop. Service.
Refrigerator sensor fault (upper or lower).
What to do: Service.
Room (ambient) temperature sensor fault.
What to do: Service.
Ice maker temperature sensor fault; ice may stop dispensing.
What to do: Service.
Water tank temperature sensor fault (models with a tank).
What to do: Service.
Water flow sensor fault.
What to do: Unplug for 60 seconds, plug into a wall outlet (no power strip), make sure the water valve is fully open and the line is not kinked. If it returns, call.
Cooling and communication
Cycle error: the freezer did not get cold enough soon after start, or warmed up during operation.
What to do: Plug directly into a wall outlet, confirm the compressor runs, check door seals and vents. If temperatures stay high, call.
Refrigerant problem on the high or low side (LG lists a possible leak or valve fault).
What to do: Sealed-system work. A technician with EPA certification is required.
Communication error between boards (main and display, or dispenser and display).
What to do: Unplug for five minutes. If it returns, the wiring or a board needs a look.
Ice maker motor fault.
What to do: Service.
Water tank missing or not detected.
What to do: Reseat the tank.
Not a fault
Room is very cold or very hot for the refrigerator.
What to do: Move it or improve ventilation; garages are the usual culprit.
Display works but cooling is off.
What to do: With the refrigerator door open, hold the Fridge button and press Express Freeze three times (some models: hold both for 3 seconds).
Before you call
What you can safely try
- Write down the exact code.
- Unplug for five minutes and plug back in (LG's general reset).
- Make sure the refrigerator is on a wall outlet, not a power strip.
- For dH-type codes, a full 12-hour defrost with the doors open.
- Check that nothing blocks the vents inside or the back of the unit.
Turn off power before you touch anything inside the refrigerator. If a step needs tools or panels removed, leave it to a technician.
When to call
When it is time for a technician
- FF or dH comes back after a full defrost.
- CH or CL appears (sealed system).
- The compressor does not run or temperatures keep rising.
- Any code returns within a week.
A code tells you where to look, not which part failed. We confirm the cause with tests and readings before we quote. Diagnostic from $59, credited toward the repair. Refrigerator repair · LG repair
Denver note
What we see in the Denver area
Many Denver-area LG refrigerators live in garages or basements as second units. In winter a cold garage can confuse the controls and in summer a hot one makes the compressor run nonstop. Lo and HI warnings are the refrigerator telling you the room is outside its range.
Sources
Where this information comes from
Code meanings are checked against LG's own published support material and written here in plain language. Models differ, so your owner's manual has the final word.
Pricing
What it costs to get started
One diagnostic fee, credited toward the repair. The full price in writing before any work starts.
Repair prices depend on the part and the labor, so we quote after the diagnosis instead of guessing on the phone. If a repair is not worth it, we will tell you.
Diagnostic visit
from $59
Credited toward the repair
FAQ
Questions we hear
Call (719) 745-8080 with anything not covered here.
What does Er FF mean on an LG refrigerator?
The freezer fan fault. Usually the fan is surrounded by ice from a defrost problem. Defrosting clears it temporarily; finding the defrost failure fixes it.
Is Er dH serious?
It means the defrost system did not do its job. Food stays safe for now, but cooling will get worse as ice builds. It is worth repairing before it turns into a warm refrigerator.
Related