Skip to content
(719) 745-8080

Error codes · Sub-Zero

Sub-Zero Refrigerator Error Codes

Sub-Zero refrigerators rarely show long code lists to owners. Instead you see the word Service flashing, sometimes with a code such as EC40 or EC50, or EE on older Classic models. Here is what those mean and what Sub-Zero says you can safely do.

  • 7codes explained
  • Checkedagainst Sub-Zero sources
  • From $59if you need us

How to read Sub-Zero refrigerator codes

On current models, Service flashes between the zone temperatures. Some show a code like EC40 or EC50 with it. Older Classic (BI) units show EE with a flashing wrench, and some show a three-part code such as 15-1-01. The first thing to do every time is check the actual temperatures in each zone: Sub-Zero's own advice depends on whether they are near normal or rising.

Code list

Current models

Service flashing

The compressor has been running too long, or there may be a cooling problem.

What to do: If temperatures are near normal: turn the unit off, clean the condenser, make sure nothing blocks the door, then turn the breaker off for 30 seconds and back on. If Service returns or temperatures rise, call.

EC40 + Service

Freezer compressor running too long: a door left ajar, or a sealed system, fan or sensor problem (600, 648PRO and 700 series).

What to do: If temperatures are within about 10 degrees of setpoint, clean the condenser and hold the door-ajar (bell) key 15 seconds to clear. If temperatures are high and the door was not left open, call.

EC50 + Service

Refrigerator compressor running too long.

What to do: If temperatures are near normal, clean the condenser and hold the door-ajar key 15 seconds to clear. If temperatures are high, call.

Service + Ice flashing (700 series)

The ice maker water valve was on too long, so ice production stopped.

What to do: Turn the unit off for 10 seconds and back on. If it keeps happening, or no ice comes back, call.

Classic (BI) series

EE + wrench, left side

Freezer thermistor (temperature sensor) fault.

What to do: No owner fix. Needs service.

EE + wrench, right side

Refrigerator thermistor fault.

What to do: No owner fix. Needs service.

15-1-01

Refrigerator compressor relay stuck closed, which Sub-Zero says electrical noise can trigger.

What to do: A technician updates the control software or replaces the board.

Before you call

What you can safely try

  • Check the real temperature in each zone with a thermometer.
  • Clean the condenser (top grille on most built-ins) with the unit off.
  • Make sure doors close fully; a tall bottle or drawer can hold one open.
  • Use the door-ajar key clear only when temperatures are near normal.

Turn off power before you touch anything inside the refrigerator. If a step needs tools or panels removed, leave it to a technician.

When to call

When it is time for a technician

  • Temperatures are more than about 10 degrees above setpoint.
  • Service comes back after the condenser is clean.
  • EE, 15-1-01 or any Classic code with a wrench.
  • The unit runs constantly and the compressor area is hot.

A code tells you where to look, not which part failed. We confirm the cause with tests and readings before we quote. Diagnostic from $59, credited toward the repair. Refrigerator repair · Sub-Zero repair

Denver note

What we see in the Denver area

Built-in Sub-Zeros in Denver kitchens pull air through the top grille, and our dry, dusty air loads that condenser fast. A clogged condenser is the most common reason we see Service flashing, and it is the first thing we clean on every visit.

Sources

Where this information comes from

Code meanings are checked against Sub-Zero's own published support material and written here in plain language. Models differ, so your owner's manual has the final word.

Pricing

What it costs to get started

One diagnostic fee, credited toward the repair. The full price in writing before any work starts.

Repair prices depend on the part and the labor, so we quote after the diagnosis instead of guessing on the phone. If a repair is not worth it, we will tell you.

How we price repairs · Warranty

Diagnostic visit

from $59

Credited toward the repair

FAQ

Questions we hear

Call (719) 745-8080 with anything not covered here.

Is it safe to clear a Sub-Zero Service light myself?

Only when temperatures are near normal. Clearing the code while the unit is warm hides a real problem.

Do you repair Sub-Zero if you are not a factory service center?

Yes. We are an independent repair company and we work on Sub-Zero refrigeration out of warranty. If your unit is still under the Sub-Zero warranty, use that coverage first.

Related

Related services and guides

Call now