Skip to content
(719) 745-8080

Error codes · KitchenAid

KitchenAid Dishwasher Error Codes

KitchenAid dishwashers report faults as F-E codes, for example F9 E1. Models without a digital display flash the code with the Clean light instead. Here is how to read the flashes and what the common codes mean.

  • 6codes explained
  • Checkedagainst KitchenAid sources
  • From $59if you need us

How to read KitchenAid dishwasher codes

On models with a display, the code shows as F#E#. On models with lights only, count the flashes of the Clean light: the first group of flashes is the F number, then a short pause, then the second group is the E number. Seven flashes, pause, one flash is F7 E1. To reset, cut power for 30 seconds: unplug, or turn off the breaker if it is hardwired.

Code list

Common codes

F9 E1

Long drain: the dishwasher is not draining.

What to do: Clean the filter, check the drain hose for kinks or clogs, and check the disposer connection and air gap.

F8 E4

Water detected in the base (drip tray).

What to do: Check the supply connection and fill hose, let excess suds settle and use only automatic dishwasher detergent. Press Cancel to clear. If it returns, there is a leak to find.

F6 E4

Float switch problem; an unlevel dishwasher can also trip it.

What to do: Level the dishwasher and cut power for 30 seconds. If it continues, service.

F7 E2

Wash motor error.

What to do: Cut power 30 seconds. If it returns, service.

F6 E1

User interface or main control communication error.

What to do: Cut power 30 seconds. If it returns, service.

H2O

Not detecting water.

What to do: Make sure the water supply is on and the hose is not kinked.

Before you call

What you can safely try

  • Count the Clean light flashes carefully and write down F and E numbers.
  • Clean the filter (twist-out cylinder at the bottom).
  • Check the drain hose and air gap.
  • Level the dishwasher.
  • Cut power for 30 seconds.

Turn off power before you touch anything inside the dishwasher. If a step needs tools or panels removed, leave it to a technician.

When to call

When it is time for a technician

  • F9 E1 with a clean filter and clear hose.
  • F8 E4 that returns (leak).
  • F7 E2 or F6 E1 after a reset.
  • Water on the floor.

A code tells you where to look, not which part failed. We confirm the cause with tests and readings before we quote. Diagnostic from $59, credited toward the repair. Dishwasher repair · KitchenAid repair

Denver note

What we see in the Denver area

KitchenAid dishwashers share many parts with Whirlpool and Maytag models, so parts are usually available locally in Denver within a day or two. That keeps most repairs to one or two visits.

Sources

Where this information comes from

Code meanings are checked against KitchenAid's own published support material and written here in plain language. Models differ, so your owner's manual has the final word.

Pricing

What it costs to get started

One diagnostic fee, credited toward the repair. The full price in writing before any work starts.

Repair prices depend on the part and the labor, so we quote after the diagnosis instead of guessing on the phone. If a repair is not worth it, we will tell you.

How we price repairs · Warranty

Diagnostic visit

from $59

Credited toward the repair

FAQ

Questions we hear

Call (719) 745-8080 with anything not covered here.

My KitchenAid Clean light is flashing. What does it mean?

It is flashing a code. Count the flashes: first group is F, second group is E. Then look it up above.

Can I fix F9 E1 myself?

Often yes. Most F9 E1 calls we see are a clogged filter or a kinked hose. If those are clear, the drain pump is next.

Related

Related services and guides

Call now