Skip to content
(719) 745-8080

Error codes · Manitowoc

Manitowoc Ice machine Error Codes

Manitowoc Indigo and Indigo NXT ice machines show alerts on the front display and keep a history with dates and counts. The two you will see most are Long Freeze and Long Harvest, Manitowoc's Safety Limits 1 and 2. Here is how they work and what usually causes them.

  • 5codes explained
  • Checkedagainst Manitowoc sources
  • From $129if you need us

How to read Manitowoc ice machine codes

On Indigo models, press the left arrow to see the alert list, highlight an alert and press the check mark. The screen shows when it happened and how many times, and the down arrow lists possible causes. The alert is cleared from that screen with the check mark. A machine that stops on a safety limit restarts after the alert is cleared or power is cycled, but it will trip again if the cause is still there.

Code list

Safety limits (Indigo technician handbook)

Safety Limit 1: Long Freeze

A freeze cycle reached the maximum time (35 minutes on current firmware). The board forces a harvest; six long freezes in a row stop the machine.

What to do: Scale on the evaporator or water system, a dirty condenser, a hot room, low refrigerant, a water valve leaking through, or an expansion valve problem.

Safety Limit 2: Long Harvest

Harvest reached the maximum time (7 minutes on current firmware). The board runs a water thaw and returns to freeze; three long harvests in a row stop the machine.

What to do: Scale holding ice to the evaporator, a hot gas (harvest) valve not opening, ice thickness probe out of adjustment, or a water curtain switch issue.

Other alert areas

Sensor and probe alerts

Faults on the ice thickness probe, water level probe or temperature sensors.

What to do: Probes covered in scale give false readings. Cleaning often clears them; damaged sensors are replaced.

Curtain alerts

The water curtain switch stayed open too long.

What to do: Ice stuck behind the curtain or a curtain out of place.

Power and communication alerts

Power loss, display or keypad problems.

What to do: Check the supply; then a technician checks connections.

Before you call

What you can safely try

  • Open the alert list and note the alert name, date and count.
  • Check that the water supply is on and the filter is not clogged.
  • Clean the condenser filter or coil.
  • Make sure the room is not unusually hot.
  • Schedule a cleaning if it has been more than six months.

Turn off power before you touch anything inside the ice machine. If a step needs tools or panels removed, leave it to a technician.

When to call

When it is time for a technician

  • Long Freeze or Long Harvest keeps returning.
  • The machine has stopped on a safety limit.
  • Ice is thin, thick or hollow after a cleaning.
  • Water leaking from the bin.

A code tells you where to look, not which part failed. We confirm the cause with tests and readings before we quote. Diagnostic from $129, credited toward the repair. Ice machine repair · Manitowoc repair

Denver note

What we see in the Denver area

In Denver bars and restaurants, Manitowoc machines often sit in hot back rooms with grease in the air. That combination clogs condensers and raises freeze times. A clean condenser and a proper cleaning cycle prevent many Long Freeze alerts.

Sources

Where this information comes from

Code meanings are checked against Manitowoc's own published support material and written here in plain language. Models differ, so your owner's manual has the final word.

Pricing

What it costs to get started

One diagnostic fee, credited toward the repair. The full price in writing before any work starts.

Repair prices depend on the part and the labor, so we quote after the diagnosis instead of guessing on the phone. If a repair is not worth it, we will tell you.

How we price repairs · Warranty

Commercial diagnostic

from $129

Credited toward the repair

FAQ

Questions we hear

Call (719) 745-8080 with anything not covered here.

How do I clear a Manitowoc alert?

Open the alert list from the display, select the alert and press the check mark to clear it. If it returns, the cause is still there.

What causes Long Freeze on a Manitowoc?

Most often scale, a dirty condenser or a hot location. Low refrigerant or a valve problem are less common but need a technician.

Related

Related services and guides

Call now