Skip to content
(719) 745-8080

Error codes · Wolf

Wolf Range Error Codes

Wolf dual-fuel ranges and wall ovens show short codes when the control sees a door lock, temperature or sensor problem. Most of them have the same first step: a breaker reset. Here is what each one means.

  • 6codes explained
  • Checkedagainst Wolf sources
  • From $59if you need us

How to read Wolf range codes

Legacy Wolf dual-fuel ranges show ERR followed by a number. L Series wall ovens show F codes. Wolf's first step for almost every code is to turn the home circuit breaker off for 30 seconds, turn it back on and retest. If the code comes back, the range needs service.

Code list

Dual-fuel ranges (legacy)

ERR 01

Door lock or unlock switch not sensed within 60 seconds, usually during self-clean.

What to do: Breaker off 30 seconds, then on and retest. If it persists, service.

ERR 02

Over-temperature: the oven got hotter than the safety limit.

What to do: Breaker reset and retest. If it returns, service; do not keep using the oven.

ERR 03

Open circuit on the oven temperature sensor (RTD); cooling fans may run constantly.

What to do: Breaker reset. If it returns, the sensor or its wiring needs service.

ERR 04

Short circuit on the oven temperature sensor.

What to do: Breaker reset. If it returns, service.

PF

A past power failure, or the oven is too hot for the selected mode.

What to do: Turn the selector to a mode, then to Off; open the door to cool the cavity; breaker reset and retest.

L Series wall ovens

F1

Door lock or unlock switch not sensed within 60 seconds, or the lock state changed during heating (for example after the door was slammed).

What to do: Reset power at the breaker, then turn on Bake to see if F1 returns. If it does, service.

Before you call

What you can safely try

  • Turn the breaker off for 30 seconds and back on.
  • Let a hot oven cool with the door open before retesting.
  • Close the oven door gently; slamming can trip door lock codes.
  • Write down which mode the oven was in when the code appeared.

Turn off power before you touch anything inside the range. If a step needs tools or panels removed, leave it to a technician.

When to call

When it is time for a technician

  • ERR 02 (over-temperature), even once.
  • Any code that returns after a breaker reset.
  • Door locked and will not release after cooling.
  • Gas smell at any time: leave the house and call the gas utility first.

A code tells you where to look, not which part failed. We confirm the cause with tests and readings before we quote. Diagnostic from $59, credited toward the repair. Range & cooktop repair · Wolf repair

Denver note

What we see in the Denver area

Wolf gas burners at Denver's altitude should still burn crisp and blue. Yellow or lifting flames are not an error code, but they are worth a service visit.

Sources

Where this information comes from

Code meanings are checked against Wolf's own published support material and written here in plain language. Models differ, so your owner's manual has the final word.

Pricing

What it costs to get started

One diagnostic fee, credited toward the repair. The full price in writing before any work starts.

Repair prices depend on the part and the labor, so we quote after the diagnosis instead of guessing on the phone. If a repair is not worth it, we will tell you.

How we price repairs · Warranty

Diagnostic visit

from $59

Credited toward the repair

FAQ

Questions we hear

Call (719) 745-8080 with anything not covered here.

What does ERR 03 mean on a Wolf range?

The control sees an open circuit on the oven temperature sensor. If a breaker reset does not clear it, the sensor or its connection needs replacing.

My Wolf shows PF. Is it broken?

Not necessarily. PF often means the power went out, or the oven is too hot for the mode you picked. Follow the reset steps above.

Related

Related services and guides

Call now