Skip to content
(719) 745-8080

Error codes · Thermador

Thermador Oven Error Codes

Thermador wall ovens and ranges show an "E" followed by a number when the control detects a fault. Thermador does not publish a full list of what each number means for owners. Here is what you can safely do, what we usually find, and when to call.

  • 5codes explained
  • Checkedagainst Thermador sources
  • From $59if you need us

How to read Thermador oven codes

An E code means the control found a fault. Thermador's guidance is to press Timers or another key to stop the beeping, reset the oven if needed, and if the code stays, turn the oven off and contact service. Codes like E0211, E1601 or E0510 that appear during a software update are Home Connect update codes, not oven faults.

Code list

What Thermador publishes

E + number

A fault or error code from the oven control.

What to do: Press Timers or any key to silence; reset the oven (breaker off and on). If the code returns, turn the oven off and call service.

E0211 / E1601 / E0510 during an update

Home Connect software update error.

What to do: Follow the Home Connect update steps in the app.

What usually causes Thermador oven codes

During or after self-clean

Door lock or latch not reaching position, or overheating.

What to do: Let the oven cool completely before resetting. Do not force the door.

Oven not heating with a code

Temperature sensor, element, igniter on gas models, or the control.

What to do: A technician measures sensor resistance and element continuity.

Code with fan running nonstop

Cooling fan or temperature sensing issue.

What to do: Turn the oven off and call; the control is protecting itself.

Before you call

What you can safely try

  • Write down the exact E code and when it appeared (preheat, bake, self-clean).
  • Turn the breaker off for a minute and back on.
  • Let the oven cool fully after a self-clean before trying again.
  • Never pry a locked door.

Turn off power before you touch anything inside the oven. If a step needs tools or panels removed, leave it to a technician.

When to call

When it is time for a technician

  • The same E code returns after a reset.
  • The door stays locked after the oven is cool.
  • Burning smell, smoke or tripped breaker.
  • The oven does not heat or overheats.

A code tells you where to look, not which part failed. We confirm the cause with tests and readings before we quote. Diagnostic from $59, credited toward the repair. Oven repair · Thermador repair

Denver note

What we see in the Denver area

Thermador wall ovens in Denver remodels are often installed in tight cabinetry. Poor airflow around the cabinet raises the temperature of the controls during self-clean, which is when we see most Thermador codes. We check the install as well as the oven.

Sources

Where this information comes from

Code meanings are checked against Thermador's own published support material and written here in plain language. Models differ, so your owner's manual has the final word.

Pricing

What it costs to get started

One diagnostic fee, credited toward the repair. The full price in writing before any work starts.

Repair prices depend on the part and the labor, so we quote after the diagnosis instead of guessing on the phone. If a repair is not worth it, we will tell you.

How we price repairs · Warranty

Diagnostic visit

from $59

Credited toward the repair

FAQ

Questions we hear

Call (719) 745-8080 with anything not covered here.

Why does Thermador not list every E code?

The detailed codes are service diagnostics meant for technicians. The owner advice is the same for all of them: silence, reset, and call if it returns.

Should I use self-clean on a Thermador oven?

It is designed for it, but self-clean is hard on locks, sensors and controls. Run it occasionally rather than often, and never leave the house while it runs.

Related

Related services and guides

Call now